Jinan Kewei Protective Equipment Co., Ltd.
Main products:Radiation Plate,Radiation Protection Glass,Radiation Protection Door
Contact Us
  • Contact Person : Mr. Shao Tarzan
  • Company Name : Jinan Kewei Protective Equipment Co., Ltd.
  • Tel : 86-531-66582009
  • Fax : 86-531-66582009
  • Address : Shandong,Jinan,No. 16, Fengshan Road, Changqing District
  • Country/Region : China
  • Zip : 250000

Lead-lined Drywall KW-RLD06

Lead-lined Drywall KW-RLD06
Product Detailed
1) High sound-absorbent ability.2) Environmental friendly. 3) Energy saving.4) Dimensional stability. 5) Radiation-proof


The Lead Lined Drywall (lead lined sheetrock, lead lined gypsum wallboard) should be fastened at a minimum of 8" on center at the edges of each sheet, and at a minimum of 12" on center at the intermediate studs with normal drywall screws. 2" wide strips of sheet lead of the same lead thickness should be applied to each of the joint studs using a standard type of construction adhesive, prior to installing the Lead Lined Drywall (lead lined sheetrock, lead lined gypsum wallboard). These strips of sheet lead will provide the necessary 1" overlap with the adjoining sheets. Each fastener will be covered with a lead disc 3/8” in diameter and equal in thickness to the lead laminated to the sheetrock to eliminate the possibility of radiation leakage at the point of fastening. They should be applied using a fast drying construction adhesive. 

Refer to the drawings here for the typical methods of installing and fastening lead lined drywall. (lead lined sheetrock, lead lined gypsum wallboard)


Our lead can be laminated to most of your drywall requirements. Including, but not limited to the following:

Mold resistant wallboard Impact resistant wallboard Fire rated wallboard And virtually all USG, National Gypsum, Temple Inland and Georgia Pacific products

Radiation Protection Products also has leaded glass, lead bricks and neutron doors to assist you with all your lead shielding needs

Lead-lined Drywall KW-RLD06

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.